Pavement & Sealcoating
Commercial & Residential Protection

Precision Pavement Restoration & Sealcoating

Protect and dramatically enhance your asphalt driveway or commercial parking area. We provide hot rubberized crack filling, industrial coal-tar/asphalt emulsion sealcoating, and high-visibility striping that extends pavement life by decades.

Comprehensive Asphalt & Surface Protection

Prolong the life of your asphalt driveway by up to 15 years and prevent expensive repaving with our heavy-duty restorative treatments.

Commercial-Grade Sealcoating

High-polymer asphalt emulsion that forms a deep satin-black protective armor against California sun, tire friction, automotive oils, and winter moisture.

Hot-Pour Rubberized Crack Sealing

Deep routing, wire brushing, and application of flexible vulcanized rubber that bonds into cracks, preventing water seepage from eroding your subbase.

Precision Line Striping

Laser-straight parking stalls, EV charging designated bays, directional arrows, numbering, and ADA accessibility stencils with traffic-grade reflective paint.

Oil & Petrochemical Priming

Chemical remediation and oil-spot primer bonding that seals motor oil deposits so the new protective finish adheres permanently without peeling.

Paver Cleaning & Joint Sealing

Power washing interlocking driveway pavers, sweeping fresh polymeric joint sand, and applying breathable satin sealers that prevent weed sprouting.

Curb & Walkway Painting

High-visibility red fire lane curbs, clean residential address numbers, safety yellow steps, and custom decorative borders to elevate overall property aesthetics.

The 4-Stage Pavement Restoration Cycle

Meticulous prep work accounts for 70% of sealcoating longevity. Here is how we ensure flawless durability.

1

Industrial Prep & Blow

We blow out all dirt, edge overgrown turf away from borders, and pressure wash heavy surface grime and embedded debris.

2

Crack Sealing & Priming

Cracks larger than 1/4 inch are treated with hot-pour rubber sealant; oil spots are treated with petro-block bonding primer.

3

Precision Sealcoat

Hand-squeegee application along delicate borders, followed by uniform spray application for smooth, seamless jet-black coverage.

4

Curing & Barricading

We mark and barricade the driveway with high-visibility caution tape during the 24–48 hour cure cycle before welcoming vehicles back.

Direct Driveway Restoration with 15% Discount

Total Care Pro provides upfront, transparent property proposals tailored to your specific requirements with guaranteed quality and no hidden fees.

  • High-solids, non-toxic, odorless asphalt emulsion
  • Rubberized hot-pour crack sealant included
  • Clean hand-cut borders against grass & pavers
  • Complete 24-month adhesion guarantee
2 to 3-Car Driveway Package
Custom Quote
Tailored to your property specifications • Free Estimate
Reserve via SMS

Driveway Sealcoating Across Northern California Communities

Fast local dispatch to your neighborhood:

Palo Alto Los Altos Los Altos Hills Los Gatos Monte Sereno Cupertino Sunnyvale Mountain View Atherton Menlo Park Santa Clara Campbell San Jose Milpitas Fremont Newark Hayward Willow Glen Almaden Silver Creek Valley Morgan Hill San Martin

Frequently Asked Questions

Common questions and expert answers regarding our Pavement & Sealcoating service.

1. How often should asphalt driveways be sealcoated in California?
We recommend sealcoating every 2 to 3 years. Regular sealcoating protects against oxidation, UV sun damage, vehicle oil leaks, and water penetration that causes potholes.
2. How long before I can walk and drive on newly sealed pavement?
Foot traffic is safe after 4 to 6 hours. Vehicles should stay off the surface for a minimum of 24 to 48 hours depending on humidity and ambient temperature to allow full curing.
3. Do you repair cracks before applying the asphalt sealcoat?
Yes, we thoroughly clean cracks with high-pressure air and fill all structural cracks wider than 1/4 inch with hot-pour or cold-pour elastomeric rubberized filler before sealing.
4. Can you clean oil and fluid stains from concrete driveways?
Yes, we treat oil, transmission fluid, and tire marks with industrial alkaline degreasers followed by 4,000 PSI hot surface washing to lift stubborn grease.
5. Do you re-sand interlocking concrete pavers?
Yes, after power washing paver patios and driveways, we install polymer joint sand that hardens to prevent weed growth and insect tunneling while stabilizing the blocks.

Explore All Our Services

Professional, licensed, and bonded property maintenance solutions for Silicon Valley homes and businesses.

Chat with Toti!

Total Care Instant Quote

Instant Service Estimator Online
iv>